Sanwa 107A54634A PGS-CLE BLACK Ver

[PREMIUM STANDARD]
●SSL-compatible programmable servo
※Compatible with CODE10 (M17, MT-5, MT-R, M12S(RS), EXZES ZZ, MT-44)
Not compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
●Compatible with MULTI SETTING GEAR
●In addition to the factory-set data (USER), you can select three types of preset data, making it easier to adjust servo settings (compatible with MULTI SETTING GEAR)
※The settings of the three types of preset data, BASE/QUICK/DRIFT, cannot be changed.
●Compatible with Extreme Response (SXR) mode
●Compatible with Ultra Response (SUR) mode
●Compatible with Super Response (SSR) mode
●Compatible with High Response (SHR) mode
●Compatible with Li-Po 2-cell
●Low profile servo
●High speed type
●Coreless motor
●Metal gear specification
●Equipped with aluminum heat sink
●WATERPROOF (equivalent to IPX4)
※Recommended BEC current value: 1.5A or more
※Servo horn not included.

Speed: 0.09sec/60° (7.4V), 0.11sec/60° (6.0V)

Torque: 12.8kg・cm (7.4V), 10.8kg・cm (6.0V)

Dimensions: 40.5 x 20.5 x 26.5mm

Weight: 50.4g

●Compatible with SXR (Extreme Response), achieving twice the smoothness of SUR (Ultra Response) and the world's fastest tracking.

When combined with compatible devices, it achieves amazingly smooth and precise operation never before experienced.

●MULTI SETTING GEAR compatibility allows for expanded functionality, parameter settings to be changed and saved, and firmware updates to be made.

●SSL and telemetry compatible. Parameters can be changed in real time wirelessly from a CODE10 compatible transmitter.

Temperature, current, and volume position data inside the servo can be transmitted to a compatible transmitter via telemetry.

From the PGSII, the servo leads and Z connector housings have a black finish.

*To change the settings of PGS servos, a combination of a CODE10 compatible transmitter (M17, M12S (RS), EXZES ZZ, MT-44) and an SSL compatible receiver (RX-493i, RX-492i, RX-49T, RX-493, RX-492, RX-491, RX-472, RX-482, RX-47T) or the MULTI SETTING GEAR is required.
*If you use a gyro (SGS-01C/01D) that does not support SSL connection, you cannot change settings from the transmitter using the SSL function.
■Response settings when using PGS servos
The PGS servo's response when using SSL (Sanwa Synchronized Link) is different from its response in each response mode (NOR, SHR, SSR, SUR).
When using each response mode, configure the settings using the MULTI SETTING GEAR, then connect to CH1/CH2 for use.
■The servo's internal temperature, current, voltage, and volume position data can be transmitted to the transmitter via telemetry, so you can check the servo's status at any time. *Initial settings using the MULTI SETTING GEAR are required.
■Settings: ◯SSL-CH (SSL channel setting) ◯STRETC (stretcher adjustment) ◯BOOST (boost adjustment)

◯D-BAND (dead band adjustment) ◯MV-MID (mid-range torque change adjustment) ◯MV-END (late-range torque adjustment)

◯BRAKE (brake adjustment)

●MV-HOLD (power sense adjustment across the entire range) ●MV-FRQ (feeling adjustment across the entire range)

●MAX-PW (MAX duty adjustment)

※MULTI SETTING GEAR is required to set ●.

※When using FH5U or in SXR response mode, telemetry and SSL functions cannot be used.

※Recommended BEC current value: 1.5A or higher