Futaba 039409 CGY770R + GPB-1 Set
Futaba CGY770R: All-in-One FBL System with UR Mode
The Futaba CGY770R is an advanced, all-in-one 3-axis flybarless (FBL) system for helicopters that integrates a receiver, gyro, and governor. It features the new UR (Ultra Response) Mode and wireless tuning capabilities for unparalleled setup convenience and performance.
Key Features of the CGY770R:
-
Fully Integrated System: Combines a high-performance receiver, 3-axis gyro, and governor into a single, compact unit. The gyro can also operate independently if needed.
-
Ultra-Fast Control: Employs the fastest control algorithms for both gyro and governor functions.
-
Compact & Lightweight: Its small, low-profile, and lightweight design allows for easy installation in any model.
-
Program Box Compatible: Parameters can be configured using the GPB-1 Gyro Program Box.
-
*Please Note: GPB-1 requires firmware Ver. 5.0 or later for use with the CGY770R.*
-
-
Dual Menu System: Settings are divided into a Basic Menu for fundamental setup and an Expert Menu for detailed fine-tuning.
-
S.BUS2 System Support: Fully compatible with Futaba's S.BUS2 protocol for a clean and digital wiring setup.
-
Dual Rx Link System: Enhances signal redundancy and reliability.
-
Sensor Response Adjustment: Allows precise tuning of the sensor's reaction to aircraft movement.
-
Wireless Tuning: Supports wireless adjustment of specific parameters from your transmitter.
-
Unified Gyro Tuning: Adjust PID gains for the gyro from a single, convenient screen on the GPB-1.
-
New UR (Ultra Response) Mode: Delivers the fastest possible control response when paired with compatible helicopter servos.
-
*To use UR Mode, you must use the HPS-HC701 or HPS-HT700 servos (as of March 15, 2024). These servos also require a firmware update to Ver. 2.0 or later.*
-
Car UR servos are not compatible.
-
*UR Mode is activated and configured solely through the CGY770R and GPB-1; no transmitter settings are required.*
-
About UR Mode:
UR Mode is Futaba's fastest control system, proven and trusted by many top-level drivers in the car racing world with the T10PX high-end transmitter. Now, you can experience this legendary, ultra-responsive performance in your helicopter.
Futaba GPB-1 Programming Unit
Unlock the full potential of your Futaba CGY760R and CGY755 helicopter gyros with this dedicated programming interface, designed to simplify complex adjustments with clear, intuitive controls. The cable-connected unit puts detailed parameter tuning at your fingertips for optimized flight performance.
Key Features:
• Direct compatibility - Works seamlessly with CGY760R and CGY755 gyros
• Cable-linked operation - Stable connection for real-time adjustments
• Clear display - Easy-to-read screen for parameter monitoring
• Intuitive navigation - Straightforward menu and button layout
• Compact portability - Lightweight design for field programming
Why Pilots Rely on This:
• Precision tuning - Fine-tune gyro settings with confidence
• Field convenience - Make adjustments without a computer
• Futaba integration - Factory-designed for flawless performance
Product Information:
-
Compatibility: Futaba CGY760R, CGY755
-
Connection: Wired (included cable)
-
Power: Self-contained (battery not included)
-
Display: LCD screen
-
Package: Programming unit with connection cable
Refine your helicopter's flight characteristics with the Futaba GPB-1 Programming Unit - the essential tool for serious pilots who demand exact control over their gyro settings. Whether fine-tuning at the field or configuring from scratch, this dedicated interface delivers professional results with unmatched convenience.
Original: $58,905.00
-70%$58,905.00
$17,671.50More Images
Futaba 039409 CGY770R + GPB-1 Set
Futaba CGY770R: All-in-One FBL System with UR Mode
The Futaba CGY770R is an advanced, all-in-one 3-axis flybarless (FBL) system for helicopters that integrates a receiver, gyro, and governor. It features the new UR (Ultra Response) Mode and wireless tuning capabilities for unparalleled setup convenience and performance.
Key Features of the CGY770R:
-
Fully Integrated System: Combines a high-performance receiver, 3-axis gyro, and governor into a single, compact unit. The gyro can also operate independently if needed.
-
Ultra-Fast Control: Employs the fastest control algorithms for both gyro and governor functions.
-
Compact & Lightweight: Its small, low-profile, and lightweight design allows for easy installation in any model.
-
Program Box Compatible: Parameters can be configured using the GPB-1 Gyro Program Box.
-
*Please Note: GPB-1 requires firmware Ver. 5.0 or later for use with the CGY770R.*
-
-
Dual Menu System: Settings are divided into a Basic Menu for fundamental setup and an Expert Menu for detailed fine-tuning.
-
S.BUS2 System Support: Fully compatible with Futaba's S.BUS2 protocol for a clean and digital wiring setup.
-
Dual Rx Link System: Enhances signal redundancy and reliability.
-
Sensor Response Adjustment: Allows precise tuning of the sensor's reaction to aircraft movement.
-
Wireless Tuning: Supports wireless adjustment of specific parameters from your transmitter.
-
Unified Gyro Tuning: Adjust PID gains for the gyro from a single, convenient screen on the GPB-1.
-
New UR (Ultra Response) Mode: Delivers the fastest possible control response when paired with compatible helicopter servos.
-
*To use UR Mode, you must use the HPS-HC701 or HPS-HT700 servos (as of March 15, 2024). These servos also require a firmware update to Ver. 2.0 or later.*
-
Car UR servos are not compatible.
-
*UR Mode is activated and configured solely through the CGY770R and GPB-1; no transmitter settings are required.*
-
About UR Mode:
UR Mode is Futaba's fastest control system, proven and trusted by many top-level drivers in the car racing world with the T10PX high-end transmitter. Now, you can experience this legendary, ultra-responsive performance in your helicopter.
Futaba GPB-1 Programming Unit
Unlock the full potential of your Futaba CGY760R and CGY755 helicopter gyros with this dedicated programming interface, designed to simplify complex adjustments with clear, intuitive controls. The cable-connected unit puts detailed parameter tuning at your fingertips for optimized flight performance.
Key Features:
• Direct compatibility - Works seamlessly with CGY760R and CGY755 gyros
• Cable-linked operation - Stable connection for real-time adjustments
• Clear display - Easy-to-read screen for parameter monitoring
• Intuitive navigation - Straightforward menu and button layout
• Compact portability - Lightweight design for field programming
Why Pilots Rely on This:
• Precision tuning - Fine-tune gyro settings with confidence
• Field convenience - Make adjustments without a computer
• Futaba integration - Factory-designed for flawless performance
Product Information:
-
Compatibility: Futaba CGY760R, CGY755
-
Connection: Wired (included cable)
-
Power: Self-contained (battery not included)
-
Display: LCD screen
-
Package: Programming unit with connection cable
Refine your helicopter's flight characteristics with the Futaba GPB-1 Programming Unit - the essential tool for serious pilots who demand exact control over their gyro settings. Whether fine-tuning at the field or configuring from scratch, this dedicated interface delivers professional results with unmatched convenience.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Futaba CGY770R: All-in-One FBL System with UR Mode
The Futaba CGY770R is an advanced, all-in-one 3-axis flybarless (FBL) system for helicopters that integrates a receiver, gyro, and governor. It features the new UR (Ultra Response) Mode and wireless tuning capabilities for unparalleled setup convenience and performance.
Key Features of the CGY770R:
-
Fully Integrated System: Combines a high-performance receiver, 3-axis gyro, and governor into a single, compact unit. The gyro can also operate independently if needed.
-
Ultra-Fast Control: Employs the fastest control algorithms for both gyro and governor functions.
-
Compact & Lightweight: Its small, low-profile, and lightweight design allows for easy installation in any model.
-
Program Box Compatible: Parameters can be configured using the GPB-1 Gyro Program Box.
-
*Please Note: GPB-1 requires firmware Ver. 5.0 or later for use with the CGY770R.*
-
-
Dual Menu System: Settings are divided into a Basic Menu for fundamental setup and an Expert Menu for detailed fine-tuning.
-
S.BUS2 System Support: Fully compatible with Futaba's S.BUS2 protocol for a clean and digital wiring setup.
-
Dual Rx Link System: Enhances signal redundancy and reliability.
-
Sensor Response Adjustment: Allows precise tuning of the sensor's reaction to aircraft movement.
-
Wireless Tuning: Supports wireless adjustment of specific parameters from your transmitter.
-
Unified Gyro Tuning: Adjust PID gains for the gyro from a single, convenient screen on the GPB-1.
-
New UR (Ultra Response) Mode: Delivers the fastest possible control response when paired with compatible helicopter servos.
-
*To use UR Mode, you must use the HPS-HC701 or HPS-HT700 servos (as of March 15, 2024). These servos also require a firmware update to Ver. 2.0 or later.*
-
Car UR servos are not compatible.
-
*UR Mode is activated and configured solely through the CGY770R and GPB-1; no transmitter settings are required.*
-
About UR Mode:
UR Mode is Futaba's fastest control system, proven and trusted by many top-level drivers in the car racing world with the T10PX high-end transmitter. Now, you can experience this legendary, ultra-responsive performance in your helicopter.
Futaba GPB-1 Programming Unit
Unlock the full potential of your Futaba CGY760R and CGY755 helicopter gyros with this dedicated programming interface, designed to simplify complex adjustments with clear, intuitive controls. The cable-connected unit puts detailed parameter tuning at your fingertips for optimized flight performance.
Key Features:
• Direct compatibility - Works seamlessly with CGY760R and CGY755 gyros
• Cable-linked operation - Stable connection for real-time adjustments
• Clear display - Easy-to-read screen for parameter monitoring
• Intuitive navigation - Straightforward menu and button layout
• Compact portability - Lightweight design for field programming
Why Pilots Rely on This:
• Precision tuning - Fine-tune gyro settings with confidence
• Field convenience - Make adjustments without a computer
• Futaba integration - Factory-designed for flawless performance
Product Information:
-
Compatibility: Futaba CGY760R, CGY755
-
Connection: Wired (included cable)
-
Power: Self-contained (battery not included)
-
Display: LCD screen
-
Package: Programming unit with connection cable
Refine your helicopter's flight characteristics with the Futaba GPB-1 Programming Unit - the essential tool for serious pilots who demand exact control over their gyro settings. Whether fine-tuning at the field or configuring from scratch, this dedicated interface delivers professional results with unmatched convenience.
